TPV Gate

The Titan Pressure Valve is designed to address higher-pressure applications up to 100 psig (6.8 barg) and higher temperatures up to 660° F (350° C). The TPV Gate is engineered for highly abrasive applications and requires minimal maintenance over the life of the valve. Featuring Vortex’s patented rising-blade technology ensures an optimal seal and positive material shutoff with the use of lifting lugs. This prevents the blade from jamming or packing material upon closure, which can cause serious downtime. Unlike most knife gates, the Vortex TPV contains a replaceable seat that can significantly increase the life of the valve.

This fully bonneted slide gate consists of cast ductile iron flanges with a hardened 440C stainless steel blade and seat. Flanges match #125/150 ANSI mounting pattern with through holes and blind tapped holes. A double acting air cylinder actuates the valve open and closed and optional metering controls are available. Material contact is 440C stainless steel and ductile iron.

Applikation

  • Dilute and Dense phase pneumatic conveying
  • Gravity flow conveying
  • Handles abrasive materials like minerals, frac sand, and fly ash
  • Mounting boss for the addition of an optional proximity switch
  • Standard sizes: 2″- 10″ | 50mm – 250mm

Detaljer

Patented Rising Blade Design

The beveled leading edge of the blade closes into a matching beveled lower flange to force the blade into the seat. A matching bevel on the clevis forces the blade into the seat on the opposite end of the blade. The bevel on the leading edge of the blade ends before it reaches the blade guide. This forces material forward and back into the convey line.

Spring Loaded Blade Guides

The blade is kept in contact with the seat throughout the stroke of the air cylinder with the aid of blade guides. These guides are supported by multiple wave springs on both sides of the blade that apply constant upward pressure helping to seal the valves. This feature extends the service life of the valves and makes it ideal for higher pressure applications.

High Temperature Design

From the ductile iron housing to the precision metal-to-metal seal, the TPV contains no polymers or elastomers that can become problematic at high temperatures. The combination of a stainless steel piston rod and the air gap between the body and the air cylinder help reduce the transfer of heat to the air cylinder making it ideal for higher temperature applications.

The Compact Design makes removal easy if maintenance needs to be performed

The Replaceable seat, Blade and Blade Guides significantly increase valves life

The Packing Gland is removable while in-line for easy packing replacement.

Hos oss får du alltid den bästa servicen och en säker leverans, något som gör att du kan känna dig trygg med oss som uppdragspartner. Kontakta oss via formuläret bredvid eller ring oss på 042-220203 för frågor eller beställning.