Wye Line Diverter

The Vortex Quantum Series Wye Line Diverter is specifically engineered to handle dry bulk solids in vacuum or dilute phase pneumatic conveying systems with pressures up to 15 psig (1 barg) depending on size. A full flow orifice provides unrestricted conveying of material. The live-loaded seals are shielded from abrasion by a metal insert.

Key Industries Served: Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles

Rated for ATEX Zone 0/20 internal and Zone 1/21 external

Översikt

Handles powders, granules and pellets
Shifts “on the fly”
Wear compensating hard polymer seals
Unobstructed opening
Positive seal through closed port
Serviceable while in-line
Diverts or converges material flow
Food friendly options available
Gravity flow or dilute phase pneumatic conveying (pressure or vacuum)
Handles non abrasive to moderately abrasive powders, granules and pellets
Horizontal or vertical valve orientation
Open / closed or volume metering of material
Available in 2, 3, or 4-way configurations
Material construction options available
Standard sizes: 2″ -12″ | 50mm – 300mm | Contact us for custom sizes
Standard sizes 3-Way & 4-Way: 2″ – 6″ | 50mm – 150mm | Contact us for custom sizes

Alternativ

2 – WAY:

2 – WAY Straight:

3 – WAY:

4 – WAY:

Detaljer

Shim removal for seal adjustment while valve is in-line.
Full port opening eliminate internal ledges that can trap material.

Fördelar

Ordinary flapper-style diverter valves rely on elastic seals which are exposed to blast abrasion causing them to erode and tear away in service. The Wye Line Diverter is designed so the seal plates are shielded from blast abrasion providing long, reliable service.

Rotating tunnel diverter valves typically have seals which are exposed to excessive wear upon actuation and are prone to seizing and binding due to material buildup between the plug and the housing. The Wye Line Diverter is self-cleaning on each actuation and is designed for high cycle service.

Traditional cast iron diverter valves are heavy and bulky, increasing their installation costs. The compact design and low weight of the Wye Line Diverter is advantageous when installation is required in crowded or overhead equipment areas.

The Wye Line Diverter offers positive sealing in both vacuum and pressure conveying systems. The scissor material shearing action allows the valve to reliably diverted on a stream of material (when required).

Specifikationer

SPECIFICATIONS
Size/Bore Options 2” to 12” Pipe or Tube  (2″ to 6″ Pipe or Tube on 3 and 4-Way)
Media Powder, Pellets, Granulars
Connection Options ANSI, DIN, JIS, or Compression Couplings
Media Temperature 180°F (82°C) for standard gate with modifications allow up to 400°F (204°C)
Media Pressure/Vacuum Up to 15 psig, 1 barg (depending on size)
Valve Construction Options 304 or 316L Stainless Steel, Aluminum, and/or Carbon Steel
Material Contact Options 304 or 316L Stainless Steel, Aluminum, and/or Carbon Steel
Seal/Seat Material Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, and/or Silicone Rubber
Drive/Actuation Double Acting Air Cylinder and Solenoid Operated Air Control Valve, Electric Actuator, Chain Wheel, Hand Wheel
Position Confirmation Magnetic Reed, Proximity, or Mechanical Limit Switches
Compliance Approvals CE, ATEX, FDA
Industry Use Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles

Modifikationer

MODIFICATIONS
*more modifications available based on application
S Material / metal contact is 316L stainless steel.
SL Diverter has straight through conveying line designed for easier “in line” installation and less system conveying pressure drop when using multiple diverters.
P10 Standard tube size diverters are made with schedule 10 pipe throughout.
P40 Standard tube size diverters are made with schedule 40 pipe throughout.
HT3 Modifications are made allowing 250°F (121°C) continuous to 300°F (149°C) intermittent service.
HT4 Modifications are made allowing 400°F (204°C) continuous to 450°F (232°C) intermittent service.
WS Gate blade is electropolished. Polyethylene (PET or UHMW) pressure plate seals are used to replace nylon.
OF 45/30 Inlets and outlets are flanged with ANSI, DIN or JIS connections. The outlet opposite the air cylinder is offset at 30 or 45 degrees.

Hos oss får du alltid den bästa servicen och en säker leverans, något som gör att du kan känna dig trygg med oss som uppdragspartner. Kontakta oss via formuläret bredvid eller ring oss på 042-220203 för frågor eller beställning.